Fast-curing, seamless, flexible membranes for tanks, containment, bridges, car parks, and pits.
Tell us about your site and our team will get back to you.
Free quotes and advice.
Polyurea is a two-component, thick-film coating that reacts in about 5 seconds, so a full finished thickness can be applied in one pass. It bonds to concrete and metal, is relatively unaffected by moisture and temperature during application, and can cover up to 1,000 m² a day.
Once cured it is waterproof and resists abrasion, chemicals, heat, and impact. Typical products stretch more than 300% before they break, so it copes with movement. It can be coloured, textured for slip resistance, and supplied in a potable water approved formulation.
Fast cure, high elongation, and strong resistance to moisture, abrasion, and chemicals. Aliphatic grades resist UV.
Rigid and hard-wearing, but more prone to peeling and cracking in demanding, moving environments.
Versatile and colourfast, but bonds less strongly and usually needs recoating sooner.
Dirt and oil are removed, usually by abrasive blasting. Polyurea cannot go over oily concrete.
Joints and cracks are repaired and primer applied to a clean, dust-free surface.
Components are heated to 60-70°C and sprayed through plural-component equipment at 2,000 PSI or more.
A UV-stable topcoat is added where needed. Floors can often be done in one day.
Spalling repaired on the concrete silos, then protected with a fade-resistant polyurea coating.
Flume pipes abrasive blasted, primed, and coated with a polyurea system from scaffold.
A long-running leak traced with concrete x-ray and water testing to an old escalator void, then fixed with a combi joint, grout, and a polyurea membrane.
AWS Services was founded in 2000 by Director Carlos Abreu, who still manages operations today. Every project is backed by a team with experience across the civil, construction, and remedial sectors.
Remedial, civil, coatings, and construction capability under one contractor.
Experience gained across many sectors of the construction industry.
Practical solutions scoped to your site and budget, without compromising on safety or quality.
Head office in Mitcham, Melbourne, and a dedicated Head of Sales for Western Australia.
Talk to our team about your site, scope, and timeframe.
