Remedial, civil, and protective coating contractors working across VIC, NSW, QLD, and WA

office@awsaus.com.au 451 Whitehorse Road, Mitcham VIC 3132

Protective Coatings

Commercial and strata waterproofing

Roofs, balconies, basements, car parks, lift pits, joints, and pools. We specify and install the right system, and find the leak first if there is one.

Get a project quote

Tell us about your site and our team will get back to you.

Free quotes and advice.

Trusted on landmark works
Overview

Protecting structures from water, leaks, and moisture

AWS specifies and installs a wide range of waterproofing systems for commercial, industrial, civil, and strata buildings. Every project starts with a water test, then surface preparation, then the system applied to the manufacturer’s specification.

Because we also do leak detection, concrete repair, and crack injection, we can fix the damage the water has caused as well as stopping it.

Waterproofing
Services

Waterproofing for every part of the building

Commercial and industrial

Strata and body corporate

Systems

Membranes and systems we install

Torch-on

Heat-fused bitumen sheets that form a dense, fully bonded barrier.

Best for: Flat roofs, terraces, and podiums

Polyurethane

Liquid membranes that follow upstands and penetrations without seams.

Best for: Balconies, rooftops, and joints

Polyurea

Spray-applied, fast-curing, and flexible, bonding to concrete and steel.

Best for: Car parks, tanks, pits, and bridge joints

Epoxy

Hard, chemical-resistant coatings for surfaces in constant contact with water.

Best for: Pools and wet areas

Bentonite and PVC

Below-ground systems for basements and retaining walls.

Best for: Basements and heritage basements

Cementitious

Hydrostatic coatings that resist water pressure from outside.

Best for: Basement car parks and pits

Projects

Waterproofing projects

ProjectSystemLocation
Expansion joint waterproofing, Collins SquarePolyurethaneVIC
Terrace slab tanking, Lowther HallTorch-onVIC
Underground tank waterproofing, Belysa TowerPolyureaNSW
Bridge deck joint sealing, M5PolyureaNSW
Swimming pool waterproofing, Sunshine Leisure CentreEpoxyVIC
Pipeline waterproofing, ZinfraPolyprime and PolyeuroNSW
Basement waterproofing, Ryman HealthcareBentoniteVIC
Underground car park leak repair, RACV City ClubPolyureaVIC
Heritage basement waterproofing, Melbourne UniversityPVCVIC
Rooftop waterproofing, SP 40654Torch-onNSW
Courtyard and planter waterproofing, South Yarra TowersPolyurethane and bitumenVIC
Heritage pool waterproofing, 61-63 Darling StreetEpoxyVIC
Rooftop waterproofing, Austin HospitalPolyurethaneVIC
Basement car park hydrostatic waterproofing, SP 357433CementitiousNSW
Balcony and pool waterproofing and tiling, SP 14164EpoxyNSW
On site

Commercial and strata waterproofing

How it is done

How the work is done

1

Water test

We test the area to confirm where water is getting in.

2

Prepare

Surfaces are cleaned, repaired, and primed.

3

Apply

The system is installed and detailed at joints, upstands, and penetrations.

4

Test and hand over

Flood tests or moisture checks, then documentation and warranty details.

Why AWS Services

Why builders and asset owners choose AWS

AWS Services was founded in 2000 by Director Carlos Abreu, who still manages operations today. Every project is backed by a team with experience across the civil, construction, and remedial sectors.

25+Years in the industry
20,000+Projects delivered
4States serviced
01

One contractor, multiple disciplines

Remedial, civil, coatings, and construction capability under one contractor.

02

25+ years in the industry

Experience gained across many sectors of the construction industry.

03

Quality, programme, and cost

Practical solutions scoped to your site and budget, without compromising on safety or quality.

04

National reach

Delivering works across Victoria, New South Wales, Queensland, and Western Australia.

FAQs

Common questions

The questions we get asked most. Can’t see yours? Call 1300 665 325.

Which waterproofing system is best?

It depends on the area and how it is used. We recommend the system after seeing the site.

A well-installed, maintained torch-on system can last 20 to 30 years, and polyurea up to 25 years in some environments.

Yes. We use thermal imaging, moisture mapping, and water testing to find the source before quoting the repair.

Yes. Car parks, balconies, roofs, planters, and facades for strata and OC managers.

Have a project that needs the right contractor?

Talk to our team about your site, scope, and timeframe.